Portable Hypo Generator- Portachlor
 
 


  •  
 Portachlor is a portable Sodium Hypochlorite generator.
  •  
 It is a batch process system
  •  
 The Electrolyzer is light weight and portable.
  •  
 Specific Reaction tank is not required. Can use any plastic tank.
  •  
 The Electrolyzer is only need to be dipped into the tank containing saltwater or Seawater.
  •  
 The cable is pre-connected to the Electrolyzer and sealed so no water ingress to the terminal.
  •  
 Can use the reaction tank as the Dosing tank after removing the Electrolyzer
  •  
 No need for interconnection of cable or pipeline.
  •  
 Ready to use system
  •  
 In Eight hours the system produces 250 grams/500 grams and 1000 grams of active chlorine.(Depending on the model)
  •  
 Electronic timer with memory helps the system to complete the batch even if there is a power shutdown.
  •  
 The Power supply is lightweight and wall mountable.
  •  
 Power supply unit can take wide voltage fluctuations and frequency changes

Application

 
1
 Small water treatment facilities for disinfection of drinking water
2
 Waste water, Effluent and Sewage treatment.
3
 Hotels, Hospitals, Educational institutions for Drinking water
 
System Specification:
Model No. PBP 25 PBP 50 PBP 100
Active Chlorine Generated 32Grams/hr 62Grams/hr 120Grams/hr
Batch Time 8 hours 8 hours 8 hours
Total Chlorine Produced 250 grams/ batch 500 grams/ batch 1000 grams/ batch
Hypochlorite strength 7 ~ 8.0 Gpl 7 ~ 8.0 Gpl 7 ~ 8.0 Gpl
NaOCl Produced Per Batch 35 liters 70 liters 140 liters
Water that can be treatedwith 1 ppm of chlorine 250,000 liters(approx.) per batch 500,000 liters(approx.) per batch 1,000,000 liters(approx.) per batch
Tank Size 50 liters 100 liters 150 liters
Salt Consumed 1.5 kgs/per batch 2.25kgs/per batch 4.5kgs/per batch
AC Power Consumed 1.5 kw/ per batch 3 kw/ per batch 5 kw/ per batch
 
Operation

 
1.
 Put good clean salt (as indicated above) into any suitable tank
2.
 Fill the reaction tank with water as indicated above.
3.
 Mix well till water dissolves the salt.
4.
 Switch on the power supply.
5.
 Set the timer at 8 hours.
6.
 The system will start and the chlorine production will begin.
7.
 After the preset time the power supply will stop.
8.
 Now the Sodium Hypochlorite is ready.
9.
 Remove the Electrolyzer from the Tank.
10.
 The hypo can be dosed from the tank through a Dosing Pump.
 
 
Get your own website at Web Bazaar