Floor Mounted Electrochlorinator

Floor Mounted Electrochlorinator


	It is a batch process system
	The Electrolyzer is fixed inside the Reaction tank.
	Reaction tank made of Fiber Glass with Vinyl Ester Resin
	Long lasting tank.
	Tank is provided with salt measurement and filtering system
	Electromechanical timer for accurate time.
	Timer stops automatically during power failure and starts on power supply resumption, to maintain exact batch time.
	Eight hours batch time.
	The long life Power supply.
	Power supply unit can take wide voltage fluctuations and frequency changes.

Application
1	Medium to large water treatment facilities for disinfection of drinking water
2	Waste water, Effluent and Sewage treatment.
3	Hotels, Hospitals, Educational institutions for Drinking water.
4	Disinfection in Water parks, Cooling water circuits, Fire water storage tanks

System Specification:

Model No.	PBP 25	PBP 50	PBP 100	PBP 200	PBP 400
Active Chlorine Generated	32Grams/hr	62Grams/hr	120Grams/hr	250Grams/hr	490Grams/hr
Batch Time	8 hours	8 hours	8 hours	8 hours	8 hours
Total Chlorine Produced	250grams/ batch	500grams/ batch	1000 grams/ batch	2000 grams/ batch	4000 grams/ batch
Hypochlorite strength	7 ~ 8.0 Gpl	7 ~ 8.0 Gpl	7 ~ 8.0 Gpl	7 ~ 8.0 Gpl	7 ~ 8.0 Gpl
NaOCl Produced Per Batch	35 liters	70 liters	140 liters	280 liters	560 liters
Water that can be treated with 1 ppm of chlorine	250,000 liters (approx.)per batch	500,000 liters (approx.)per batch	1,000,000 liters (approx.) per batch	2,000,000 liters (approx.) per batch	4,000,000 liters (approx.) per batch
Salt Consumed	1.5kgs/per batch	2.25kgs/per batch	4.5kgs/per batch	9 kgs/per batch	18kgs/per batch
AC Power Consumed	1.5kw/per batch	3 kw/ per batch	5 kw/ per batch	10 kw/ per batch	20 kw/ per batch

Operation

Put good clean salt (as indicated on the tank) in the space provided on the top cover of the Reaction tank

Insert the fresh water pipe in the Salt feed opening

Open the water tap and fill the reaction tank upto the indicated mark.

The water will dissolve the salt as it fills the tank.

Switch on the power supply.

Set the timer at 8 hours.

The system will start and the chlorine production will begin.

After the preset time the power supply will stop.

Now the Sodium Hypochlorite is ready.

10.

Open the bottom Valve and remove all the sodium hypochlorite into a storage tank.

11.

The hypo can be dosed from the storage tank through a Dosing Pump.